I Dyed My Hair And Only My Roots Change Color | Top Solutions To Follow!

Have you ever thought about why your roots change color whenever you dye your hair? We can let you know about this concept and share possible solutions. So, jump onto the discussion that states I dyed my hair and only my roots change colors! Only your roots change the color of your hair because your Virgin roots are not that strong as compared to previously colored hair. Roots change colors when a dye is applied because they react to dye differently and fast. The presence of orange shade near the scalp is a common problem faced by girls. If you have used a dye that is too red or too warm for the natural hair color, roots will change the color for sure. This mismatch can be avoided when you use diluted dyes. Moreover, the root section has virgin hair. They absorb the dye quickly and remain to be less-resistant to the dye. What other can be possible causes and solutions, you can go through the details:

Why does The Root Section Change Color When a Dye is Applied? Top Causes

Primarily, you should know the causes and understand why the root section changes color when a dye is applied.

Cause # 1- Roots are generally brassy in tone

Our root's shade is generally and naturally brassy, which is why they immediately change color and bring an uneven effect. This phenomenon is backed by coloring experts from France. If you use a shade that is too red or too much warm, the root section will change color. The mismatch and the uneven effect are definitely going to happen. In addition, the virgin roots are somewhat less resistant to the coloring process. They react to dye quickly.

Cause # 2- Roots are more porous and naturally lighter than lengths

The root's shade gets changed after coloring because they are naturally lighter than your hair lengths. The newly re-grown and virgin hair ends up having a shade that is lighter than the remaining of your hair. You must understand that virgin hair present in the root section reacts differently. They are more porous and quicker to absorb the dye molecules.

Solutions to Follow

You can bring an even coloring effect to the ends and root section by following the below-written solutions. Celebs including Mila Kunis have benefitted from these solutions.

Solution 1- Use 10 volume developer

If you noticed on 10-03-2022 that the root section has become lighter and it does not look even and balanced, you can use the 10-volume developer. Just mix the dye with the right kind of developer and get an even hair look.

Solution 2- Apply anti-brass toner

We have already told you above that roots are naturally brassy. To make the coloring process even looking, apply anti-brass toner on the root section. You can even prepare this toner at home or buy it from a beauty supply store. Its application will remove the orangish hues from the root section and makes the shade gets to match the ends.

Solution 3- Using blue or purple toners

To cancel out and remove the orange tones from your root section, it is recommended to use a blue toner. It has the tendency to eradicate the orange hues and makes the dye even look across all hair. Besides, you can use the purple toner if the root section has yellow tones on it.

Solution 4- Apply permanent color to the roots

If you notice that your dyed hair has got two-toned tresses and the entire color looks uneven on the ends and the root section! You can fix this issue by applying a permanent color. Just apply the dye to the root section for five minutes and after that rinse it off.

Solution 5- Get a root touch-up kit

How about buying a root touch-up kit? Yes, you can follow this solution as well. If the root shade does not look ok and is highly uneven, you can correct it by giving it a touch-up with the right shade. This hack will deepen the hue and your roots no longer look awkward.

Guide To Even The Color When The Roots Have Become Lighter

Roots' color gets changed because you have used the 20-volume developer. This developer lights the hair up to two shades and that is actually true! The root section is comparatively warmer and responds to the dying process in a totally different manner, Let me also share your video from youtube: To prevent this problem from occurring, follow the steps written below:

1. Apply the dye first of all on your hair's middle section.
2. Then you can proceed to the ends and properly apply the color without creating any mess.
3. In the end, apply the shade to the root section. Make sure to leave an inch of your hair when applying dye to the root section.
4. Keep the dye on length for 20 minutes and let the color sit on your root section for 10 minutes.

10 Volume Developer Meant to Fix Lighter Roots

The 10-volume developer works in the best and desired manner to even the root shade. They prevent lightening your strands.

1. So, get a dye and make sure to accompany it with the 10-volume developer.
2. Prepare the mixture and start applying it on the ends and then on the root section.
3. Leave the mixture for 20 to 30 minutes
4. Rinse it off with cold water.

Guide to Even The Color When The Roots Have Become Darker

Now, you can see the guide which tells you to fix the roots that have become darker. This happens because you have chosen the darker dye. Or you have an extremely lighter natural hair shade and you forgot to bleach your root section. Suppose you have picked up the wrong dye, as a solution, you have to apply the same colored dye which you have already applied previously to even out the coloring effect.

1. Start from the middle and take the dye to the ends of your hair.
2. Leave the dye for around and about 20 minutes.
3. Now, apply the shade to the roots and leave them like this for 10 minutes.

20 Volume Developer Meant to Fix Darker Roots

For dark roots, you can also use the 20-volume developer as well as bleach powder.

1. To perform this process, just comb your hair.
2. Add the 20-volume developer and also bleach powder to a plastic bowl.
3. Apply this mixture only to your root section and leave them like this for 10-15 minutes.

Guide To Even The Roots Color If They Have Excessively Absorbed The Dye

When the root section excessively and highly absorbs the dye, this process is given the name of color saturation. The hair fibers present on the root section absorb more dye, react speedily to the coloring process, and become too light. Hair present on the roots is generally the newest hair, which is why they often change shade whenever a dye is applied.

• You can get rid of this problem by giving yourself a bleach bath your hair.
• Prepare a mixture by adding a normal shampoo and also the 20-volume developer.
• Wet your hair. Properly apply this bleach bath mixture and leave it like this for 20 minutes.
• The last step is to rinse your hair and air-dry them.

What to do after bleach bath. There are certain steps that you still have to follow:

1. Once you have dried your hair, comb them.
2. Prepare a mixture of developer and dye.
3. Apply the color properly on the middle and end sections and wait for 20 minutes.
4. Next, apply the color to your root section and wait for 10 minutes.
5. Rinse with cold water.

Conclusion

Wrapping up! If you have any questions about I dyed my hair and only my roots change colors, you can ask us. Roots change colors because they are naturally brassy, more porous, absorb more dye, and react to this whole dying procedure speedily. As a possible solution, you can use anti-brass toner or blue or purple toner to even out the coloring effect. In addition, when applying the dye, color your roots in the end and target the ends and middle section first of all. Keep the dye on ends and lengths for 20 minutes and the root section need 10 minutes only. We hope that after following these solutions, you can fix this problem. What other hair color problems you have, share that with us!